< Class 50 Class 55 >

British Rail assigned Class 53 to the single Brush Traction-built prototype locomotive Falcon. While not in any sense a failure, the design was the victim of advances in locomotive technology (specifically, the power obtainable from single low-speed diesel engines) and was never duplicated.


The Falcon project began in 1959 to design a new, lightweight diesel-electric Type 4 locomotive for a British Railways requirement for second generation diesel locomotives. No single lightweight diesel engine was powerful enough, so the Falcon project used twin German-designed Maybach MD655 engines like those in the Class 52 'Western' diesel-hydraulic locomotives of the Western Region. These drove Brush generators and traction motors, rather than the hydraulic transmission of the 'Westerns'.

The prototype, wearing a livery of lime green and chestnut brown and bearing the number D0280 after its Brush project number 280, emerged from Brush's Loughborough works in September 1961. Initial testing was on both Eastern and London Midland Regionss, following which it was transferred to the Western Region for power unit performance testing. Returning to Brush in March 1962, it recieved cast 'Falcon' nameplates during an overhaul and upgrade lasting over a year.

Returning to British Railways in 1963, Falcon spent six months working out of Sheffield on both passenger and freight diagramss, after which its testing was completed. Another year out of service followed, the locomotive returning in British Railways two-tone green with half yellow ends and intended for active service. There was, now, no chance of Falcon being the forerunner of a line of production locomotives. Advances in diesel engine technology made it obsolete almost from the beginning, with the development of larger and reasonably lightweight single powerplants. Brush Traction's own single-engined Type 4 design, to become the BR Class 47, became the successful contender with 512 locomotives eventually produced. Falcon was an evolutionary dead end - a functional locomotive, worth keeping in service, but there were never going to be more.

From 1965 onward the locomotive, still owned by Brush, was under contract with British Railways so that operation and repair would be handled by them, with only major repairs being handed back to the builder. Allocated to Bristol Bath Road alongside the Class 52 'Western' fleet, the locomotive worked Paddington-Bristol diagrams with them. In 1970, British Rail approached Brush Traction with a proposal to buy the (by now practically worthless) locomotive for its scrap value, which was accepted by the builder; the loco underwent a rebuild at BREL Swindon, emerging in corporate Rail Blue with full yellow ends and bearing the new number D1200. Vacuum braking and steam heating equipment was removed, and air braking was installed. In this form, Falcon was first allocated to Bristol again working alongside Class 52s, and later to Newport Ebbw Junction for use on iron ore trains.

In 1975, the locomotive was deemed uneconomic to operate due to its non-standard status and despite efforts to preserve it, Falcon was broken up in 1976. The story goes that the sale contract between Brush and British Rail forbade the locomotive to be resold for future operation by anyone else.


TOPS Numbering:Never carried
1957 Numbering:D020, later D1200
Built by:Brush Traction, Loughborough
Wheel Arrangement:Co-Co
Length:68ft 10in (20.98m)
Weight:115 tonnes (metric tons)
Maximum Speed:100mph (161 km/h)
Engine:2 x Maybach MD655
Engine Output:2700hp (2013 kW)
- 2 x 1350hp (1007 kW)
Main Generator:2 x Brush TG110-56 Mk 2
Traction Motors:6 x Brush TM73-68 Mk 2
Brake Type:Originally Vacuum, later Air
Brake Force:59 tons
Heating Type:Steam (later removed)
Route Availability:6