A laser system generally consists of three important parts:

  • An energy source (usually referred to as the pump or pump source);
  • A gain medium or laser medium;
  • A mirror, or system of mirrors, forming an optical resonator.


Schematic diagram of a typical laser, showing the three major parts.

The pump source is the part that provides energy to the laser system. Examples of pump sources include electrical discharges, flashlamps, arc lamps, light from another laser, chemical reactions and even explosive devices. The type of pump source used principally depends on the gain medium, and this also determines how the energy is transmitted to the medium; A helium-neon (HeNe) laser uses an electrical discharge in the helium-neon gas mixture, a Nd:YAG laser uses a light focussed from a flashlamp, and excimer lasers use a chemical reaction.

The gain medium is the major determining factor of the wavelength of operation, and other properties, of the laser. There are hundreds if not thousands of different gain media in which laser operation has been achieved. The gain medium is excited by the pump source to produce a population inversion, and it is in the gain medium that spontaneous and stimulated emission of photons takes place, leading to the phenomena of optical gain or optical amplification.

Examples of different gain media include:

  • Liquids, such as dye lasers. These are usually organic chemical solvents, such as methanol, ethanol or ethylene glycol, to which are added chemical dyes such as coumarin, rhodamine and fluorescein. The exact chemical configuration of the dye molecules determines the operation wavelength of the dye laser.
  • Gases, such as carbon dioxide, argon, krypton and mixtures such as helium-neon. These lasers are often pumped by electrical discharge.
  • Solids, such as crystals and glasses. The solid host materials are usually doped with an impurity such as chromium, neodymium, erbium or titanium ions. Typical hosts include YAG (yttrium aluminum garnet), YLF (yttrium lithium fluoride), sapphire (aluminum oxide) and silica glass. Examples of solid-state laser media include Nd:YAG, Ti:sapphire, Cr:sapphire (usually known as ruby), Cr:LiSAF, Er:YLF and Nd:glass. Solid-state lasers are usually pumped by flashlamps or light from another laser.
  • Semiconductors, a type of solid, in which the movement of electrons between material with differing dopant levels can cause laser action. Semiconductor lasers are typically very small, and can be pumped with a simple electric current, enabling them to be used in consumer devices such as compact disc players. See semiconductor lasers.

The optical resonator, or optical cavity, in its simplest form is two parallel mirrors placed around the gain medium. Light from the medium, produced by spontaneous emission, is reflected by the mirrors back into the medium, where it may be amplified by stimulated emission. The light may reflect from the mirrors (and thus pass through the gain medium) many hundreds of times before exiting the cavity. In more complex lasers, configurations with four or more mirrors forming the cavity are used. The design and alignment of the mirrors with respect to the medium is crucial to determining the exact operating wavelength and other attributes of the laser system.

Other optical devices, such as spinning mirrors, modulators, filters and absorbers may be placed within the optical resonator, to produce a variety of effects on the laser output, such as altering the wavelength of operation or the production of pulses of laser light.